In short
Off-track doors usually follow a snapped cable, a bumped rail or worn rollers. A technician in Yonkers fixes the cause, not just the symptom, then balances the door and tests it before handing it back.

Track problems in Yonkers
Tight driveways between houses leave inches to spare, and side tracks get clipped. Because many Yonkers garages are below grade, runoff also rusts the lower track and brackets.
The door is braced first so it can't drop, then bent sections are replaced, rollers and cables renewed, and the door is tested through several full cycles.
Why doors come off track
- A car or mower bumped the door or the track.
- A lift cable snapped or slipped off its drum, so one side dropped.
- Rollers wore out and jumped the track.
- Track brackets loosened and the tracks spread apart.
- The opener kept pulling after something blocked the door.
Until it's fixed
Stop using the door and disconnect the opener. A door that's partly out of its track is held up by tension and luck, so don't stand under it or try to force it back in yourself.
Typical parts that get replaced
- Lift cables, which fray and snap with age.
- Nylon or steel rollers with flat spots or broken stems.
- Hinges that have cracked where the panels flex.
- Track sections bent by a bumper, plus any bracket that has pulled loose from the wall.
Before leaving, the technician balances the door so it stays put halfway up and checks that it reverses when it meets an obstruction.
Around Yonkers
- Park Hill: Victorian houses on the heights above South Broadway.
- Northwest Yonkers: River-side streets toward Hastings, with older estates and carriage houses.
See the full Yonkers service area.
Questions we hear in Yonkers
Our garage is under the house on a steep hill and the door scrapes. Why?
The slab or the frame has moved. Tracks can usually be adjusted; if the opening is badly out of square the technician will explain the options.